Comprehensive Pest Control & Disinfection Services
From targeted pest elimination to hospital-grade disinfection and full
compliance programes, every ASC service is deliverded under
Intergradted Pest Management principles, with the documentation to
back it up.
Eight ways we protect your property
Targeted treatment for every common pest, plus hospital-grade disinfection all delivered under our Integrated Pest Management framework.
Integrated Pest Management
Inspect, sanitise, proof, monitor and treat the least necessary intervention, fully documented.
Cockroach Control
German & American cockroach elimination with gel baiting, monitoring and proofing.
Rodent Control
Rats & mice numbered bait stations, trapping and entry-point proofing.
Termite Control
Subterranean termite detection, mud-tube inspection and barrier treatment.
Bed Bug Control
Thorough inspection, residual treatment and 14-day follow-up verification.
Fly & Ant Control
EFK units, source reduction and colony-level baiting for kitchens and food areas.
Disinfection
Hospital-grade and commercial disinfection across all sectors.
Monitoring & Audit Support
Site maps, numbered devices, trend reports and corrective-action logs.
Integrated Pest Management The Science-led standard
Integrated Pest Management is the internationally recognised gold standard for pest control and it underpins every ASC programme. Rather than defaulting to pesticide application, IPM begins with a thorough site inspection to identify pest pressures, entry points, harborage areas and conducive conditions. From there, a structured cycle of monitoring, proofing, sanitation guidance and targeted treatment is implemented. Chemical intervention is used only when monitoring data justifies it and always at the lowest effective concentration. Every step is documented producing the audit trail that HACCP, BRCGS and FSSC 22000 inspectors require.
- Site inspection & risk assessment
- Structural proofing recommendations
- Monitoring device installation & mapping
- Targeted low-impact treatment
- Monthly trend reporting
Cockroach Control
Cockroaches are among the most persistent pests in food, healthcare and hospitality environments and a single sighting during an audit can result in a critical finding. ASC’s cockroach control programme begins with species identification, because German and American cockroaches require fundamentally different treatment approaches. German cockroaches respond best to gel bait placements at harborage points, while American species require barrier treatments and exterior proofing. We combine crack-and-crevice treatment with harborage elimination and proofing to break the breeding cycle and prevent reinfestation. Follow-up verification visits confirm treatment efficacy.
- Species identification (German & American)
- Professional gel bait placement at harborage sites
- Crack & crevice treatment
- Proofing of entry points
- Follow-up verification visits
Rodent Control
Rats and mice pose a severe contamination risk in food production, warehousing and any facility where product integrity matters. ASC’s rodent management starts with a comprehensive site survey to map activity signs droppings, gnaw marks, runways and entry points before deploying a combination of tamper-resistant numbered bait stations, snap traps and live traps appropriate to the environment. All bait stations are recorded on a site map, inspected on every visit, and their contents logged for trend analysis. Entry-point proofing seals the routes rodents use to access your building, while population monitoring tracks whether the programme is achieving the required reductions. Activity trend reports are included in every service visit record.
- Full site survey & activity mapping
- Tamper-resistant numbered bait stations
- Snap and live trap deployment
- Entry-point proofing & gap sealing
- Activity trend reports
Termite Control
Subterranean termites are responsible for significant structural damage across the Eastern Cape, and infestations can go undetected for years. ASC’s termite programme begins with a thorough inspection for mud tubes, damaged timber, moisture ingress and conducive conditions such as wood-to-soil contact and poor drainage. Where infestations are confirmed, we apply soil barrier treatments using registered termiticides that create a long-lasting chemical barrier between the colony and your structure. Soil injection targets the termite pathways directly, while corrective structural proofing advice ensures moisture and access issues are addressed at the source. An annual monitoring programme maintains the chemical barrier over time.
- Mud-tube & structural damage inspection
- Moisture & conducive condition assessment
- Soil barrier treatment with registered termiticides
- Corrective structural proofing advice
- Annual monitoring programme
Bed Bug Control
Bed bugs are a significant reputational and operational risk for hotels, lodges, guest houses and residential properties. A single confirmed infestation, if not treated quickly and thoroughly, spreads rapidly through a property. ASC’s bed bug protocol starts with a systematic inspection of mattresses, bed bases, furniture frames, skirting boards and all harbourage points documenting the extent and distribution of activity before any treatment commences. Residual insecticide treatment is applied to all affected surfaces, with a steam treatment option available for environments where chemical use must be minimised. Mattress and furniture encasement advice limits reinfestation risk, and a mandatory 14-day follow-up visit confirms treatment efficacy.
- Thorough mattress & furniture inspection
- Residual insecticide treatment
- Steam treatment option available
- Encasement & proofing advice
- 14-day follow-up verification visit
Fly & Ant Control
Flies are a direct contamination vector in food preparation areas, and their presence during a HACCP or BRCGS audit constitutes a major non-conformance. ASC supplies, installs and services Electric Fly Killer (EFK) units positioned in accordance with HACCP-aligned placement guidelines away from food preparation surfaces and positioned to intercept fly flight paths. UV tubes are replaced on schedule and catch counts logged to identify activity trends. For ant infestations, colony-level gel baiting is used rather than surface sprays, targeting the queen and disrupting the colony from within. Source reduction advice addresses the conditions attracting both flies and ants to your site.
- EFK unit supply, installation & servicing
- Colony-level gel baiting for ants
- Source reduction & sanitation guidance
- HACCP-aligned trap placement maps
- Catch-count trend monitoring
Disinfection Services
ASC’s disinfection service goes beyond surface cleaning it delivers verified pathogen elimination using hospital-grade registered disinfectants applied by trained technicians. Our primary method is ULV (Ultra Low Volume) cold fogging, which disperses micro-droplets of disinfectant into all areas of a space including surfaces, air and hard-to-reach areas that manual cleaning cannot reach. Manual surface and touchpoint disinfection is applied to high-contact surfaces,door handles, switches, countertops, equipment controls and sanitation facilities. Each application follows the manufacturer’s prescribed dwell time to ensure complete kill-off of target pathogens. A certificate of disinfection is issued after every treatment, providing documentary evidence for healthcare governance, food safety programmes and facility management records.
- Hospital-grade registered disinfectants
- ULV cold fogging application
- Surface & touchpoint disinfection
- Appropriate dwell-time protocols observed
- Certificate of disinfection issued
Monitoring & Audit Support
For commercial and regulated facilities, monitoring and documentation are as important as the treatments themselves. ASC’s monitoring programme installs numbered, mapped pest devices across your site bait stations, glue boards, EFK units and pheromone traps each recorded on a scaled site map that auditors can cross-reference during inspections. Every service visit generates a digital trend report showing device-by-device activity levels, catch counts and any corrective actions taken. When pest activity exceeds a pre-agreed threshold, a formal escalation is triggered increasing treatment frequency, adjusting the baiting strategy and issuing a corrective-action notice with resolution timeline. The result is a complete, audit-ready documentation pack aligned to HACCP, BRCGS Clause 4.13 and FSSC 22000 requirements.
- Numbered & mapped monitoring devices
- Digital trend & activity reports
- Corrective-action log management
- Threshold-based escalation alerts
- Audit-ready documentation pack
Service Plans
Choose the programme that fits your needs all plans include documentation and are delivered by trained, registered technicians.
Residential
Home & Family
Targeted pest control for family homes cockroaches, rodents, ants, flies, bed bugs and general pests. Safe for children and pets.
- Free on-site assessment
- Registered, safe product selection
- Follow-up verification included
- Flexible scheduling
Commercial Maintenance
Scheduled Programme
Monthly, bi-monthly or quarterly maintenance contracts for food, hospitality, healthcare and commercial sites with full documentation.
- IPM-based programme design
- Numbered, mapped monitoring devices
- Monthly trend reports
- Corrective-action log
- Priority response included
Compliance Programme
HACCP · BRCGS · FSSC 22000
Full audit-ready IPM programme for food production, distribution and regulated facilities designed to satisfy BRCGS Clause 4.13 and FSSC 22000.
- Full audit documentation pack
- Threshold-based escalation
- Pre-audit walkthrough attendance
- Corrective-action response < 24 hrs
- Dedicated account manager
Ready to protect your property?
Whether you need a once-off treatment or a fully documented compliance programme, ASC Pest Control delivers the right solution backed by trained technicians and audit-ready records.