PE+27 41 004 0037 JHB010 500 4661 +27 61 138 3989 info@ascpestcontrol.co.za Android app Food Safety Specialist Owned · Eastern Cape & Gauteng
ASC Pest Control logo ASC Pest Control

ASC-PC / Knowledge Base / Checklists

December shutdown pest control checklist for food factories

A food factory that closes for the December shutdown needs four things done about pests: remove the food and water before the last shift, close the building properly, keep the monitoring going while nobody is there, and inspect before the first product runs in January. The checklist below sets out each step and says who does it, the site or the pest control contractor. It is written for food and beverage plants and food packaging plants in Gauteng and the Eastern Cape.

If you are on a pest control contract, the contractor items belong in your service schedule now. If they are not there, or you have no contract, request a no-obligation site assessment. We review your current pest file and build the close-down and start-up visits into a contract pest control programme for your site.

Key points

  • A closed factory is quiet and uncleaned, and December is summer. Pests that daily activity held in check are left alone for weeks.
  • Regulation R638 requires the person in charge of the food premises to ensure that effective measures are taken to prevent or eliminate pests. A contractor does the work, but the duty stays with the site.
  • The most useful single step is a full inspection a few days before start-up, while there is still time to act and before cleaning removes the evidence.
  • Write it all down. An auditor reads the December and January records like any other month.

Why a factory shutdown is a pest control risk

During production a factory is busy and cleaned every day, and people notice things. When the plant closes, all of that stops at once. Rodents move more freely in a quiet building. Product residue left inside a conveyor sits undisturbed, and stored product insects such as flour beetles and moths feed and breed in exactly that kind of residue. Flies breed in wet organic matter, so an uncleaned drain or a bin that missed the last collection is enough.

The season makes it worse. December brings summer rain on the Highveld and warm, humid weather along the Eastern Cape coast, and insects develop faster in warm conditions. The shutdown is also when building contractors come in, and their work props doors open and cuts new holes through walls.

What the law says

Regulation R638 of 22 June 2018, made under the Foodstuffs, Cosmetics and Disinfectants Act 54 of 1972, governs general hygiene on food premises in South Africa. Regulation 10(3) requires the person in charge to ensure that effective measures are taken to prevent or eliminate flies, other insects, rodents, birds, vermin or any other pests on the food premises. Regulation 5(3)(c)(ii) and (iii) require that food premises be pest proof in accordance with the best available method and have effective means of controlling and preventing the access of flies, cockroaches or other insects. You can read both in the gazetted text of R638 (Government Gazette 41730).

Neither regulation makes an exception for the weeks a factory is closed. See also what R638 requires for pest control. Certified sites have their scheme to answer to as well. Section 4.14 of the BRCGS Global Standard Food Safety Issue 9, for example, deals with pest management, and a gap in visits or an unexplained catch after start-up is something an auditor can be expected to ask about.

Part 1, before the last shift

Start two weeks before the closing date. Most items are cleaning and housekeeping, which only the site can do.

No.CheckWho
1Give the contractor the shutdown dates, access arrangements and an emergency contact. Put the shutdown visits on the service schedule.Site and contractor
2List the maintenance and building jobs planned for the shutdown and name who controls doors and openings.Site
3Run down raw materials and work in progress. Reseal or re-wrap part-used bags and packaging, and keep what remains in sealed, labelled containers, off the floor and away from the walls.Site
4Deep clean the lines, including inside conveyors, elevators, sieves and hoppers, dead ends in pipework and the floor under machines. Dry clean dry-product lines, and leave wet-cleaned equipment drained and dry.Site
5Empty and wash the bins and skips and clear the waste yard. Book a waste collection for after the final shift.Site
6Clean floor drains and gullies, refit the covers and dry out standing water, drip trays included.Site
7Clear all food from the canteen, lockers, vending machines and offices.Site
8Carry out a full service of every device on the map. Record the catches, identified to species or pest group, so there is a clean baseline.Contractor
9Inspect the proofing: door seals, dock levellers, pipe and cable entries, vents and the roof line. Report defects in writing.Contractor
10Repair the proofing defects before closing.Site
11Decide which insect light traps stay switched on and record it. A unit with no power catches nothing.Site and contractor
12Cut back vegetation against the building and clear pallets and scrap from the perimeter.Site
13Close and lock all external doors and windows. Check that security can patrol without leaving any open.Site

For item 9, see our guide to rodent proofing and exclusion for food premises.

Part 2, while the site is closed

Security is still on site and contractors come and go.

No.CheckWho
14Agree the visit frequency for the closed weeks and keep those visits going. Review the sightings log at each visit, and record any visit that is missed and when it was made up.Site and contractor
15Security writes every sighting or sign in the pest sightings log (droppings, gnawing, birds indoors, flies) and phones the contractor and the site contact the same day.Site
16Building contractors keep doors closed when not in use, remove their food waste daily and seal every new opening before they leave.Site
17Check for leaks and blocked gutters weekly and after heavy rain. Top up the water seal in floor drain traps so they do not dry out and open a path from the sewer.Site
18Inspect anything delivered during the shutdown at goods-in, before it goes into the store.Site

We can plan this for your site. ASC Pest Control is a SAPCA member (ASC797) with operators registered under Act 36 of 1947. Request a no-obligation site assessment, or call 010 500 4661 in Gauteng or 041 004 0037 in the Eastern Cape.

Part 3, before start-up

Book the contractor's pre-start inspection for a few days before the first shift. Do the walk before the start-up clean, because cleaning removes the evidence of what happened and where.

No.CheckWho
19Check every device against the map. Replace missing or damaged devices and record all catches, identified to species or pest group.Contractor
20Walk the whole site with a torch, including under equipment and racking, ceiling voids and the perimeter. Look for droppings, gnawing, smear marks, webbing and insects, live or dead.Site and contractor
21Open the equipment that is known to hold residue and inspect it before it runs.Site
22Inspect the raw materials and packaging that stood through the shutdown for insects and rodent damage before releasing them to production.Site
23Where evidence is found: record it, have it identified, hold affected stock, and agree the treatment and a written corrective action with a root cause.Site and contractor
24Carry out any treatment that is needed. This is work for a registered pest control operator, not for site staff. Record what was applied and where, and re-inspect until the activity has cleared.Contractor
25Do the start-up clean, including food contact surfaces in any treated area, then have QA sign the area off for production.Site
26File the service reports, sightings log, corrective actions and updated trend. Review the shutdown at the first food safety meeting of the year.Site and contractor

For item 22, our guide to stored product insects explains what to look for in flour, grain, nuts, spices and dried fruit. The free pest identifier helps with anything you cannot name, and the sightings log is on our resources page.

An illustration of how it goes wrong

This is an illustration of a common pattern, not a client case. Take a snack plant in Kariega that stops on the Friday before Christmas. The lines are cleaned on the outside, but a screw conveyor that carries a flour-based coating is not opened. The last pest control visit was at the start of December and the next is booked for mid-January. During the break a building contractor replaces a dock door seal and leaves a gap at one corner.

At start-up the first sieve check on the coating line finds beetle larvae. A rodent station inside the dock door shows fresh droppings beside it. The plant now has stock on hold and a line stripped on its first day back, with no records since early December. Items 4, 14, 16, 19 and 21 would each have caught part of this earlier, when it could be dealt with without stopping production.

How a contract programme handles the shutdown

The contractor items in this checklist are ordinary contract work. Visits are scheduled against a numbered device map and corrective actions are closed out in writing. On an ASC contract these records sit in the myASConline portal with trend analysis and a one-click audit pack, so the December and January evidence is in the same place as the rest of the year. ASC is owned by accredited food safety specialists, so the programme is built around what an auditor asks to see.

We work from our Gauteng office at 272 Oak Avenue, Ferndale, Randburg, and our Eastern Cape head office in Gqeberha. See pest control in Gauteng, pest control in the Eastern Cape and food and beverage pest control, or score your current pest file with the free audit readiness self-assessment.

Frequently asked questions

Should pest control visits continue while the factory is closed?

Yes. Devices still need to be checked, and a closed building is where pest activity goes unnoticed for longest. Agree the visit dates and access with your contractor and with security before the last shift.

Who is responsible for pests during the shutdown, the site or the contractor?

The site. Regulation 10(3) of R638 places the duty on the person in charge of the food premises to ensure effective measures are taken to prevent or eliminate pests. A contractor carries out the monitoring and treatment, but the duty does not transfer.

What should we do if we find droppings or insects at start-up?

Do not clean it away first. Record and photograph it, call your pest control contractor, have it identified, and hold any stock or packaging that may be affected until QA has decided what to do with it. Then agree the treatment and a written corrective action with a root cause.

Request the assessment before the last shift

The contractor items in this checklist are what our contract programme schedules on a client's site ahead of a shutdown, and the site items are agreed with you at the assessment. If your closing date is already near, start with Part 3, because the pre-start inspection is still ahead of you. The first step is a no-obligation site assessment. We walk the premises with your pest file in hand, whoever services the site now, then propose a programme that covers the shutdown from close-down to start-up. Request your site assessment, or call 010 500 4661 (Gauteng) or 041 004 0037 (Eastern Cape).

ASC Pest Control
ASC Pest Control, written by food safety auditors ASC Pest Control is part of the ASC Food Safety Consultants group and is owned by accredited food safety specialists. Registered PCOs (Act 36 of 1947), SAPCA member ASC797.

Next Step

Never scramble for a pest file again.

Book a no-obligation site audit and assessment and see the myASConline one-click audit pack on your own facility's data.

Request a site assessment

Talk to the team that answers to auditors.

Tell us what you need and where. A registered specialist replies to arrange your site assessment.

  • Registered PCOs, Act 36 of 1947
  • SAPCA member ASC797, HACCP designed programmes
  • Gqeberha, East London and Gauteng

Prefer to talk? 041 004 0037 (Eastern Cape) · 010 500 4661 (Gauteng) · WhatsApp

  1. We replyA registered specialist replies to arrange your site assessment.
  2. Site assessmentWe walk the premises and score your current programme.
  3. Your proposalA risk-based programme and quote, built around your audit calendar.

How is pest control priced? Gauteng contract pricing · Eastern Cape price guide

Step 1 of 3
What do you need help with?
Where is the site?
How do we reach you?

Your details are never shared.

Book Now